HOW TO FLASH
Step 1; Download too Install vcom driver on your computer.Skip this footstep if inward illustration driver is alread installed on your computer.
Step 2; Download stock rom (firmware) for your device
Step 3; Download too Extract sp flash tool on your computer.After extract ,Now opened upwards sp flash tool
Step 4; Once sp flash tool is launched , Click on the scatter loading file too add together the stock rom (firmware)
Step 5; Now click download push to start out the flashing , too hence connect your device to the reckoner (make certain your device is switch off)
Step 6; During the flashing procedure your device volition restart automatically . Once flashing is completed yous volition run across the "download ok" message.
Step 7; Now yous convey successfully flashed your device.
Share This :
comment 0 comments
more_vert